Operator`s manual

OPERATION
405
Aftertreatment System Status
The Aftertreatment status submenus provide information about the
conditions required for performing a regeneration. The status can be
OK (regeneration allowed), CHECK (regeneration not allowed) or N/A
(not applicable). When ATS Status is selected, the following submenus
are available.
To perform a parked regeneration, the park brake must be engaged
and there can be no active fault codes. The system will time-out if the
duty cycle is inadequate to support an automatic regeneration or if
there is a problem that is preventing regeneration. Attempt to perform a
parked regeneration or take the vehicle to a Volvo Truck dealer for a
service regeneration.
vn-vhd.bk Page 405 Tuesday, July 1, 2008 9:44 AM