Operator`s manual

MAINTENANCE AND LUBRICATION
442
VNL Instructions
The headlight bulb can be accessed from the rear of the headlight
assembly. Raise the hood. In early production vehicles, remove the
bulb cover by turning clockwise.
In later production vehicles, the cover can be removed in the normal
counterclockwise direction.
In some cases, the cover seal may stick to the
housing, which makes removal difficult. Use special
tool 85104355 to assist in removal. Contact your
authorized Volvo dealer for the tool.
With the cover removed, grasp the bulb assembly and turn
counterclockwise to remove. Disengage the wiring connector and
remove the bulb from the vehicle.
Engage the wiring harness connector to the replacement bulb
assembly. Install into the headlamp housing. Check the bulb cover seal
and install the bulb cover. Lower the hood and check for proper
headlamp operation.
vn-vhd.bk Page 442 Tuesday, July 1, 2008 9:44 AM