Operator`s manual

MAINTENANCE AND LUBRICATION
467
Battery Voltage Protection System
An electronic battery monitor in the sleeper control module will monitor
and disconnect certain circuits if it senses that the battery voltage falls
below two different levels.
If the first level is reached, the sleeper control module will sound a
three second alarm and the LED will start blinking. If the battery
voltage is not raised within 30 seconds, the majority of lights in the
sleeper unit will be disabled.
Pressing the fan speed button over rides level one for
approximately 70 seconds, enabling the majority of the
lights in the sleeper area.
1. LED 2. Fuses
vn-vhd.bk Page 467 Tuesday, July 1, 2008 9:44 AM