Operator`s manual

MAINTENANCE AND LUBRICATION
477
Additional fuses are located in the LECM.
LECM Fuses
Fuses are standard. Reset breakers are available as an option for
some circuits. If a fuse continues to blow or disconnect, the circuit has
a malfunction and must be repaired.
If a breaker trips, the ignition or main switch must be switched off
before the breaker resets.
One type of fuse in the electrical center is termed “mini-fuse.” DO NOT
use needle-nose pliers to remove fuses.
vn-vhd.bk Page 477 Tuesday, July 1, 2008 9:44 AM