Operator`s manual

102 Maintenance
2 Separate the filter and the bowl.
Note: Always dispose of fuel according
to Federal or local regulations. Take
all waste fuel to a recycling or waste
collection center.
3 Clean and dry the bowl. Attach it to a
new filter. Use new seals at both bowl
and filter head joint. Install both on the
filter head in the vehicle.
CAUTION
Never fill filter with fuel before installing.
Contaminated fuel causes accelerated
wear to fuel system components.
4 To eliminate air from the filter, operate
the primer pump to draw fuel and fill
the filter.
5
WARNING
DO NOT work near the fan with the
engine running. The engine fan can
engage at any time without warning.
Anyone near the fan when it turns on
could be seriously injured. Before turning
on the ignition, be sure that no one is near
the fan.
Start the engine and check for
leaks. Correct any leaks with the engine
stopped.