Operator`s manual

104 Maintenance
3 Wet the seal on the new filter with clean
engine oil or fuel.
4
CAUTION
Never fill filter with fuel before installing.
Contaminated fuel causes accelerated
wear to fuel system components.
Spin on the new filter onto the filter
head until it fully contacts the seal (no
side movement evident). Tighten an
additional 1/2 to 3/4 turn by hand. DO
NOT overtighten!
5 To eliminate air from the filter, operate
the primer pump to draw fuel and fill
the filter.
6
WARNING
DO NOT work near the fan with the
engine running. The engine fan can
engage at any time without warning.
Anyone near the fan when it turns on
could be seriously injured. Before turning
on the ignition, be sure that no one is near
the fan.
Start the engine and check for
leaks. Correct any leaks with the engine
stopped.