Operator`s manual

Maintenance 135
Paint and Brightwork Care
Cab
Wash all exterior painted surfaces frequently
to remove dirt. It is especially important to
wash off salt-laden snow and ice during the
cold season. A mild detergent can be used
but avoid strong detergents.
Note: DO NOT aim the water jet directly
at door and window seals or door locks. If
locks are filled with water, use compressed
air to clean the water out and then apply
liquid graphite. Be especially careful of
leaving water in locks or around seals during
freezing weather.
Wet the surface with water to loosen dirt.
The use of steam or high pressure water
will help in removing loose dirt. Wash the
surface with a sponge using a lot of water to
flush away dirt. Dry the surface with a towel
or chamois. DO NOT wait until it is dry as
dry-dusting will scratch the surface.
Apply a coat of wax regularly. This will
help the paint and other surfaces keep their
luster. If the surface gets dull, use a restoring
cleaner specially designed for this. Clean off
all tar spots and tree sap before waxing.
When the vehicle is new, allow for enough
time for the paint to cure. Wait about 30 days
after the date of manufacture before putting
on the first coat of wax. Never wax on a hot
day under the sun and do not apply too much
pressure with a buffer as burns may develop
from the friction.