Operation Manual

03 Planning your trip
Setting a destination
03
44
Address
There are several different ways of program-
ming a destination.
It is enough to only enter the name of a town,
village, etc. to be guided to the center of the
specified town/villages.
If you know the destination's latitude and lon-
gitude, this information can also be used.
See page 31 for information about entering
text/numbers in the system's various text
fields.
NOTE
The definition of a city or area may vary from
state to state, and also within the same
state. It will sometimes be an entire city, or
a particular section of a city.
City or street
Street is marked first
Set destination Address
Searching for a destination:
1. With the previous illustration's view on the
screen, press OK to activate the preselec-
ted text field.
2.
Enter a name in the
Street: field using the
text wheel and then select
City:.
3.
Or select
City: + OK and begin entering the
name.
The following search criteria can be used:
•
Area: (country)
•
City:
•
Zip code: a zip code can also be used for
a search under
City:
•
Street:
•
Number:
•
Junction: (intersection) select an intersec-
tion as a destination.
•
Add to itinerary: mark the selection +
OK to add the address to the itinerary.
•
Information: mark the information + OK to
display information about the selected
destination.
NOTE
If the number entered does not exist for a
street address, the system will provide infor-
mation to this effect.