User guide

VT2542 Voice Gateway User Guide 8
Overview Installation Troubleshooting Contact FAQ Glossary License
Configuration: Basic Advanced TCP/IP Wireless
DSL Modem Users
If you cannot connect to the voice gateway, and your modem was turned off for at least 10 minutes, you may need
to set the PPPoE configurations.
1 Open a web browser from a computer connected to one of the VT2542 Ethernet ports.
2 Type http://192.168.15.1 in the address field and press ENTER to access the sign in window.
3 Type router in the Username and Password fields (the default is router for both fields).
4 Click on SETUP (located on the top menu bar), and then click on WAN Configuration (located on menu bar
at the left side of the screen).
5 Select PPPoE from the Type drop down menu.
6 Type the Username and Password you normally use to log into your DSL service.
7 In the Keep Alive field, type 0 to ensure that your DSL link is always active.
8 Click Connect to start your Internet connection.
9 Click Save. Open a web browser and enter a web address (try www.motorola.com). If you can access the
site, you have successfully installed your voice gateway. When your Internet connection works, go to
“Connecting Your Telephone” on page 10