User guide

VT2542 Voice Gateway User Guide 14
Overview Installation Troubleshooting Contact FAQ Glossary License
Configuration: Basic Advanced TCP/IP Wireless
WAN Configuration
1 Log in to the VT2542 (see “Logging In to the VT2542” on page 11).
2 Click SETUP.
3 Click WAN Configuration.
4 From the Type drop-down list, choose one of:
PPPoE PPPoE is used with all DSL modems See “WAN Setup for PPPoE (DSL)” on
page 15
Static For some cable modems, the cable company assigns the
cable modem a static (unchanging) IP address. You must
provide the IP address, subnet mask, default gateway,
and one to three domain name server (DNS) addresses.
See “WAN Setup for a Static IP Address
(Cable Modem)”
on page 16
DHCP Most cable modems have a dynamic IP address assigned
by the cable company DHCP server. Typically no
additional configuration is needed for the VT2542.
See “PPTP Settings” on page 17