User guide

Overview Installation Troubleshooting Contact FAQ Glossary License
Configuration: Basic Advanced TCP/IP Wireless
VT2542 Voice Gateway User Guide 21
Advanced Configuration
The ADVANCED menu provides the following links:
• UPnP — Enables UPnP so traffic for applications using UPnP can pass through the voice gateway
• IP QoS — IP quality of service (QoS) enables you to assign priority to Internet traffic based on the source and
destination IP addresses, source and destination ports, packet length, and protocol
• Port Forwarding — direct incoming traffic to specific computers on your network
• IP Filters — block applications and services based on the IP address of a LAN device
• LAN Clients — determine how computers on your network receive an IP address
• Web Filters — specify whether proxies, cookies, Java applets, ActiveX controls, or pop-ups can pass through
your voice gateway
• Dynamic DNS Client — register your voice gateway with a DNS server to access the voice gateway each
time from the WAN using the host name
• Multicast — enable IGMP Multicast
• Static Routing — define up to 16 static routes in the voice gateway routing table
• Dynamic Routing — define dynamic routes using routing information protocol (RIP)
• Remote Web Access — enable access to the voice gateway remotely over the Web
• Remote SSH Access — access the voice gateway remotely via secure shell
• Ethernet Switch — specify ethernet switch settings
NOTES:
— A red bullet point indicates that the feature is not enabled; a green bullet point indicates that the feature is
enabled.
— Universal Plug and Play (UPnP) requires one active WAN connection and the host should support this
feature.