User guide

VT2542 Voice Gateway User Guide 23
Overview Installation Troubleshooting Contact FAQ Glossary License
Configuration: Basic Advanced TCP/IP Wireless
IP QoS Traffic Rule
This window displays when you click Add on the IP QoS window. Use it to define rules for filtering packets.
IP QoS Traffic Rule fields
Field Description
Rule Name The rule name
Source IP Sets the source IP address for the rule
Source Start Port Sets the source start port
Destination IP Sets the destination IP address
Destination Start Port Sets the destination start port
Packet Length Start Sets the minimum packet size for the rule
Protocol Sets the protocol — TCP, UDP, ICMP, or Any
Traffic Priority Sets the priority for traffic matching these characteristics — High or Low
Source Netmask Sets the source subnet mask, which along with the Source IP specifies a range of source
IP addresses
Source End Port Sets the source end port
Destination Netmask Sets the destination subnet mask, which along with the Destination IP specifies a range of
destination IP addresses
Destination End Port Sets the destination end port
Packet Length End Sets the maximum packet size allowed by the rule
Physical Port Can be none, Port 1, Port 2, Port 3, Port 4, or WLAN