User guide

VT2542 Series Voice Gateway User Guide 60
Overview Installation Troubleshooting Contact FAQ Glossary License
Configuration: Basic Advanced TCP/IP Wireless
Setting Up Your Wireless LAN (WLAN)
1 Click the Wireless tab to access the features (Setup, Advanced, Security, Access List, WDS, Restart
Wireless).
2 Click the Enable Wireless box.
3 Enter the Primary SSID information.
4 Select the Channel B/G (1 through 11) from the pull down menu.
5 Select the 802.11 Mode (Mixed, B only B+, G only, G+)
Set the transmission protocol for your WLAN:
Mixed
— 802.11b/g
B only — 802.11b only
B+ — 802.11b+
G only
— 802.11g
6 Click Save. You must use the Restart Wireless feature in order for your changes to take affect.
Caution!
To prevent unauthorized eavesdropping or access to WLAN data, you must enable wireless security. The
default VT2542 settings provide no wireless security. After your WLAN is operational, be sure to enable
wireless security.
Connect at least one computer to the VT2542 Ethernet port to perform configuration.
Do not attempt to configure the VT2542 over a wireless connection.