User manual

14D-Link VWR User Manual
Chapter 3 - Configuration
Wireless
Enable AP - Check this box to enable the wireless function.
SSID - Service Set Identifier (SSID) is the name designated for a specific wireless local
area network (WLAN). The SSID’s factory default setting is DLinkVWR. The SSID can be
easily changed to connect to an existing wireless network or to establish a new wireless
network.
Disable SSID Broadcast - Uncheck the box to broadcast the SSID across the network.
All devices on a network must share the same SSID (Service Set Identifier) to establish
communication. Check the box if you do not wish to broadcast the SSID over the
network.
Channel - All devices on the network must share the same channel. (Note: The wireless
adapters will automatically scan and match the wireless setting.) For best results, use
channels 1, 6, or 11.
802.11 Mode - Select the mode from the drop-down menu.
Mixed - Select if using both 802.11b and 802.11g wireless devices.
B Only - Select if using all 802.11b wireless devices.
B+ - Select if using both 802.11b and b+ wireless devices.
G Only - Select if using all 802.11g wireless devices.