Installation Sheet

Step 3. Connect Wires
© VONN Lighting,2018
Ceiling
Canopy
Cover
Ground
Screw
Wire Connector
Bare Copper
(Ground Wire)
White
(Neutral Wire)
Black
(Line Wire)
A
F
E
Supply Wires:
Ground Wires:
Connect Black (Line Wire) from fixture to Black (Hot Wire)
from outlet box.
Connect White (Neutral Wire) from fixture to White (Neutral
Wire) from outlet box.
Connect Bare Copper (Ground Wire) from fixture to Green
or Bare Copper (Ground Wire) from outlet box.
Twist wires together clockwise and secure with wire
connector (E).
Installer Tip (2): If ground wire is not available in outlet
box, then secure Bare Copper (Ground Wire) from fixture to
ground screw (F) on canopy cover (A).
Installer Tip (3): It is recommended that two installers are required to
install the fixture. One installer to hold the fixture, and the second installer
to connect the wires.