Manual

Line 6 Modeling Pedals
Line 6 Tone Core pedals and Pocket POD can be powered from any available 9V
output using a standard black 5.5x2.1mm barrel cable.
You can power Line 6 modeling pedals, like DL4 or MM4, using the 12V high-
current output with the red 5.5x2.5mm barrel cable.
Note that PODxt, M13 and JM4 looper cannot be powered by the Pedal Power
ISO-5.
TC Electronic
TC Electronic’s Nova pedals such as the Delay, Modulator and Reverb are
powered from the high-current 12V output using a standard black 5.5x2.1mm
barrel cable. Other TC Electronic pedals which can be powered from a 9V
battery, such as the Classic series, can operate from any of the 9V outputs.
Eventide
The Eventide stompboxes (TimeFactor, ModFactor and PitchFactor) are
powered from the high-current 12V output using the red 5.5x2.5mm barrel cable.
Additional Cables
The DC power cables supplied with your ISO-5 are suitable for most common
pedal effects. If you need additional cables, different lengths, reversed polarity, or
a special connector, these are available from Voodoo Lab.
Visit www.voodoolab.com/cables.htm for more information.