Installation manual

1. General DCR 6024/6128/6000
1 – 6
Planning and Installation – Rev. 1 / 7. 2001
1.3 MECHANICAL DESIGN
Housing The housings of the Tapedeck and Processor are made of aluminium alloy which
is coated inside with alodine to prevent electrostatic discharge influences.
Modules can be locked mechanically together and unlocked for easy transport.
19-inch rack installation kit for tapedeck and processors are available
Order no.:
 BD 5197 000 175 602 211 for tapedeck
 BD 5198 000 175 602 310 for DTV processor
 BD 5199 000 175 602 410 for data processor
The rackmount kit for the tapedeck contains telescopic rails for easy access to
tapedeck mechanics.
Tapedeck and Processor are provided with four handles which facilitate transport
of the machine.
For service works, the Tapedeck can be hinged upwards, being hold by two locking
mechanism.