User manual

8/16-CH DVR Quick Start Guide
5
5. Login
After you exit the wizard setup, you can login to the DVR.
Notice: This DVR can only display options on either VGA/HDMI monitor or BNC
monitor at a given point of time, if there is live image display without menu
options，please check if there is display on other device/monitor, or long press
ESC/Fn key to wait for login dialog box to appear. Long press ESC/Fn key can
switch the output between BNC and VGA/HDMI.
Click the MENU button to bring the LOGIN dialogue box and enter the user name:
admin and password: 123456
6. Main menu setup
Click right mouse, or press ENTER button on the front panel to enter into the
main menu. Then click Setup to enter into Setup interface as shown below
Basic configuration: Users can set video system, menu language, audio, time
and authorization check.
Live configuration：Users can set name/time display, picture color and hide
cameras.
Record configuration：Users can set record quality, frame rate, resolution,
time stamp and recycle.
Schedule configuration: Users can set schedule for timer, motion detection,
VOOK