Más eficiencia energética Flujo de aire más potente Control preciso de velocidad Satisfacción garantizada Plus économe en énergie Plus puissant flux d'air Le contrôle précis de la vitesse Satisfaction garantie
MODELS 533DC, 633DC, 683DC OWNER’S GUIDE GUÍA DEL PROPIETARIO DE MODELOS 533DC, 633DC, 683DC, GUIDE D’UTILISATION – MODÈLES 533DC, 633DC et 683DC CONTENTS Important Safety Instructions ............................................................. 2 Features .............................................................................................. 5 Stand Assembly & Adjustment ........................................................... 6 Getting Started ..................................................
READ AND SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner.
- Risk of fire. Your appliance may be equipped with a detachable power supply or a cord/plug with a safety device such as a fuse. The detachable external power supply and cord have no user replaceable parts. If the power supply or cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Use only the detachable external power supply and cord that comes with your product.
authorized service facility for examination and/or repair. WEEE Recycling Fig. A Fig. B Fig. C - Risk of fire. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be removed. Discard product if the attachment plug is damaged. FCC Consumer Advisement This equipment may generate, use and/or radiate radio frequency energy that may cause harmful interference to radio communications.
FEATURES Save energy by maximizing the performance of heating and cooling systems. When you use a Vornado Air Circulator, you will not have to set your summertime thermostat as low or your wintertime thermostat as high. DIRECTABLE AIRFLOW Direct the airflow where you want it. FINGER FRIENDLY DESIGN Resists curious fingers. REMOVABLE GRILL For easy cleaning. AIR INLETS Signature inlets and powerful motor to move more air. SILICON FEET Non-marking feet added for stability.
STAND ASSEMBLY & ADJUSTMENT (MODEL 683DC) No tools required. STAND ASSEMBLY HEIGHT ADJUSTMENT (32 - 38 INCHES) 1. Place the circulator head face down on the ground on a soft surface. 2. The upper pole and lower pole are pre-assembled with the Fastening Nut (D) secured on the underside of the base. Rotate Fastening Nut counterclockwise to remove and set aside. 3. Loosen the Adjustment Collar (F) by gently rotating it counter-clockwise. Extend the poles by 3-4 inches and retighten collar. 4.
GETTING STARTED (MODEL 683DC) CORD CONNECTION 1. Insert DC power cord plug into port that extends from the bottom of circulator. VARIABLE SPEED CONTROL 1. Rotate knob to the right to turn on and increase speed. 2. Rotate knob to left to lower speed and turn off. 2. Connect the AC power cord to the power supply. 3. Plug the power cord into a power outlet. POWER SUPPLY (24V DC/1.5 AMP) Note: The external power supply may become slightly warm to the touch during normal operation.
CONTROLS (MODELS 533DC & 633DC) VARIABLE SPEED CONTROL 1. Rotate knob to the right to turn on and increase speed. 2. Rotate knob to left to lower speed and turn off.
CLEANING GRILL REMOVAL (MODELS 533DC, 633DC, 683DC) Screwdriver required. WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill. 1. Remove the 3 screws located in between the ribs of the inlet grill at roughly 10, 2, and 6 o’clock positions. Screw locations are also indicated with an arrow* () on the circulator. Do Not remove the 2 screws on the pivot arms. Release the Front Grill Clips located at the 2, 5, 7 and 10 o’clock positions.
CLEANING BLADE REMOVAL Pliers required. WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing blade. 1. First, remove the nut from the shaft by turning the nut clockwise to loosen. Pull the blade straight out from the shaft. 2. Wipe the Blade with a damp cloth. If your circulator is used in a greasy environment, such as a kitchen, mild soap or a common household cleaner may be necessary. Do not use solvents. Do not place blade in the dishwasher.
TROUBLESHOOTING PROBLEM The unit fails to power on. POSSIBLE CAUSE AND SOLUTION Unit is not plugged in. Plug Power Cord into electrical outlet. Model 683DC Only - Ensure the AC power cord is plugged into the power supply and ensure DC power cord is plugged into the circulator. Ensure unit fan speed setting is selected. Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance. The outlet is worn or damaged. Try another outlet or contact a qualified electrician.
OU R WARRANTY Vornado Air LLC (“Vornado”) warrants to the original consumer or purchaser this Vornado® Whole Room Circulator (“Product”) is free from defects in material or workmanship for a period of ten (10) years from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost. For warranty or repair service: Call 1-800-234-0604 or email help@vornado.com to obtain a Return Authorization (“RA”) form.
we expect this product to be PERFECT Esperamos que este producto sea perfecto Si no lo es, ayúdenos a corregirlo Nous exigeons de nos produits qu’ils soient parfaits Si celui-ci ne l’est pas, nous corrigerons la situation if it’s not , WE will make it right vornado.com 800-234-0604 help@vornado.