Operation Manual

English

1. Remove the 3 screws located in between

the ribs of the inlet grill at roughly 10, 2,

and 6 o’clock positions. Screw locations are

also indicated with an arrow* (



) on the

circulator. Do Not remove the 2 screws

on the pivot arms. Release the Front Grill

Clips located at the 2, 5, 7 and 10 o’clock

positions.

2. Dust or wash Front Grill with a mild dish-

washing soap. Do not place grill in the

dishwasher. The excessive heat can distort

the plastic.

3. To reattach - align the Front Grill Clips with

the holes and ﬁrmly snap each clip back

into place. Replace all the screws.

CLEANING

GRILL REMOVAL (MODELS 533DC, 633DC, 683DC) Screwdriver required.

WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill.

Front Grill Clip

Screw

Use the brush attachment on your household

vacuum cleaner to vacuum any accumulated

dust off the Front Grill and Air Inlets.

Note: The motor

is permanently

lubricated and

requires no oiling.