READ AND SAVE THESE INSTRUCTIONS Tower Heater Owner’s Guide LEER Y GUARDAR ESTAS INSTRUCCIONES Guía Del Propietario Del Calefactor De La Torre www.vornado.
Designed, engineered and supported in Andover, Kansas. Pensado, diseñado y respaldado en Andover, Kansas. www.vornado.com Questions or comments? ¿Prequntas o comentarios? consumerservice@vornado.com 800.234.
Contents Important Instructions......................................................................... 4 Vornado V-Flow™ Heat Circulation..................................................... 6 How To Use Tower Heater Controls.................................................... 7 How To Use Positioning Your Tower Heater........................................................ 8 Using Your Vornado Heater............................................................. 8 Resetting Your Vornado Heater.............
IMPORTANT INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS HEATER. Please visually inspect all internal and external components before connecting to electric current. If any damage is found, DO NOT USE THIS UNIT and contact Vornado Air LLC at 1-800-234-0604. This appliance has a polarized plug. (One blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
IMPORTANT INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS HEATER. This heater is equipped with a thermal safety shut-off system, designed to turn off the heater when an internal overheating condition is detected (see How To Use “RESETTING YOUR VORNADO HEATER,” to determine how to check and reset the heater). Do not use this heater on a circuit that has a variable speed device operating, such as a blender or a variable speed fan.
ED ED A L H WID S CIL NE ZO EATING EH NO O It is said that trust isn’t given, but earned. For decades Vornado has been earning the trust of our customers by offering them only the best. Vornado provides the highest level of performance, coupled with the highest level of support available. Complete satisfaction with no exceptions – this is Vornado’s promise to you. If you are not satisfied for any reason, please contact us.
How To Use Tower Heater Controls 1 Power On/Off Press ( ) to turn unit On or Off. LED light illuminates when the unit is On. When turning the unit Off, the display will countdown 8 seconds. This time allows the heater to cool before shut down. 2 Temperature Control Allows you to select your desired comfort level. Press ( ) to increase the set temperature. Press ( ) to decrease the set temperature. The heat output will be adjusted automatically, to accurately maintain the room temperature.
How To Use Positioning Your Tower Heater Position your heater so the V-Flow distribution of warm air is directed across the room, unobstructed. Position it in a location that is representative of the room temperature. Avoid areas of temperature extremes such as cold drafts and heat registers (see IMPORTANT INSTRUCTIONS for safe placement). Placement near a wall or corner Please position at least 6” away from walls or other large surfaces.
Advanced Safety Features Tight Grill Spacing Resists curious fingers. Cool Touch Case Safe to touch, even on high heat setting. Automatic Safety Shut Off System and Tip-Over Protection If airflow becomes blocked and overheating occurs, power to the heating element is shut off. Heater will automatically shut off if tipped in any direction. Ideal 140°F Exit Air Temperature Warm enough to heat an entire room. Cleaning and Storage How to Clean Your heater has no user serviceable parts.
Troubleshooting Problem Unit fails to power on. Possible Cause and Solution Unit is not plugged in. Plug Power Cord into electrical outlet. Tip-over switch is not making contact with the floor. Place heater on a level surface to ensure tip-over switch is making full contact with the floor. Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker / ground fault interrupter, or replace fuse (See OPERATING TIPS below). The unit has overheated.
Operating Tips In smaller areas, you might prefer to set the Fan switch to Auto (A). In the Auto setting, the fan will fluctuate speed with the heating element. In larger spaces, your Vornado® Heater, will function most effectively with the Fan switch set to Continuous (C). In the Continuous position, V-Flow will gently keep the air circulating in the room for even, uniform heating.
Tower Heater • 5 Year Limited Warranty Vornado Air LLC (“Vornado”) warrants to the original consumer or purchaser this Vornado® Tower Heater (“Product”) is free from defects in material or workmanship for a period of five (5) years from the date of purchase, depending on model. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.
PRODUCT SPECIFICATIONS MODEL ATH1 VOLTAGE 120V ~ WATTAGE 1500W AMPERAGE UNIT DIMENSIONS 12.5A 20.0” (50.8 CM.) x 7.9” (20.1 CM.) x 5.5” (14.0 CM.) ESPECIFICACIONES DEL PRODUCTO MODELO ATH1 VOLTAJE 120V ~ VATIAJE 1500W AMPERAJE DIMENSIONES DE LA UNIDAD 12.5A 20.0” (50.8 CM.) x 7.9” (20.1 CM.) x 5.5” (14.0 CM.
Vornado Air, LLC 415 East 13th Street, Andover, Kansas 67002 800.234.0604 │ www.vornado.com Speak your mind www.vornado.com/reviews Hable con franqueza www.vornado.
