Specifications

11
Engli sh
 In smaller areas, you might prefer to set the Fan switch to Auto (A).
In the Auto setting, the fan will fluctuate speed with the heating
element.
 In larger spaces, your Vornado® Heater, will function most
effectively with the Fan switch set to Continuous (C). In the
Continuous position, V-Flow will gently keep the air circulating in
the room for even, uniform heating.
 When the room temperature is higher than the set temperature it is
normal and correct to have little to no heat coming out of the unit.
 When the unit is first turned on, there is a slight delay before heat
will start to be produced.
 Your heater, like any other 1500 watt electric heater, draws up to
12.5 amps of electric current. If using your heater on High Heat
causes your home’s circuit breaker or fuse to trip, we offer the
following suggestions:
• Try turning off other electrical appliances that run on the same
circuit as your heater.
• Run your heater on Low.
• Have your electrician add an additional circuit to your home’s
electrical system.
 ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR ANY
ELECTRICAL APPLIANCE.
 Do not use more than one heater at a time.
 Never ignore or take lightly the signs of an electrical problem, such
as:
 Warm outlet cover plates
 Sparking at outlet when plugging in or during operation
 Light flickering or dimming (indicates a shared circuit or
problem)
Investigate the cause of these before continuing to use the heater.
Operating Tips