MODELS 623DC & 723DC OWNER’S GUIDE MODELOS 623DC & 723DC GUÍA DEL PROPIETARIO, MODÈLES 623DC & 723DC GUIDE D’UTILISATION CONTENTS Important Safety Instructions.............................................................. 2 Getting Started.................................................................................... 4 Cleaning............................................................................................... 5 Grill & Blade Removal..........................................................
READ AND SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See www.vornado.
- - is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Use only the detachable external power supply and cord that comes with your product. Before plugging power cord into electrical outlet, be sure that all electrical information on the rating label, including voltage, is compatible with your outlet’s power supply. Never use the cord as a handle or otherwise yank, strain or stretch the power cord.
GETTING STARTED DIRECTABLE AIRFLOW Direct the airflow where you want it. VARIABLE SPEED CONTROL 1. Rotate knob to the right to turn on and increase speed. 2. Rotate knob to left to lower speed and turn off. FINGER FRIENDLY DESIGN Resists curious fingers. 1. Insert DC power cord plug into port located on the underside of the motor. 2. Connect the AC power cord to the power supply. 3. Plug the power cord into a power outlet. POWER SUPPLY Model 623DC: 24VDC /1.5 Amp Model 723DC: 24VCD/2.
CLEANING Because your product moves a substantial amount of air, it will need regular cleaning to remove lint, dust and grime. Never clean the product in any manner other than instructed in this owner's guide. WARNING Observe the following safety information to avoid risks and property damage. Do unplug your product before cleaning. Do Not use gasoline, thinners, solvents, ammonias or other chemicals for cleaning. Do Not attempt to repair or replace parts.
GRILL & BLADE REMOVAL WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill. GRILL REMOVAL 1. Release the front grill clips located at the 10, 6 and 2 o’clock positions. Press the Front Grill Clip downward to release. A flat head screw driver may be used if front grill clips are difficult to release. 2. Dust or wash Grill with a mild dishwashing soap. Clip Clip 3.
TROUBLESHOOTING PROBLEM The unit fails to power on. POSSIBLE CAUSE AND SOLUTION Unit is not plugged in. Plug Power Cord into electrical outlet. Ensure the AC power cord is plugged into the power supply and ensure DC power cord is plugged into the circulator. Ensure unit fan speed setting is selected. Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance. The outlet is worn or damaged. Try another outlet or contact a qualified electrician.