MODELS 5303DC, 6303DC, 6803DC, 7503DC OWNER’S GUIDE GUÍA DEL PROPIETARIO DE MODELOS 5303DC, 6303DC, 6803DC, 7503DC, GUIDE D’UTILISATION – MODÈLES 5303DC, 6303DC, 6803DC et 7503DC, 5303DC, 6303DC, 6803DC, 7503DC 모델 사용자 가이드, モデル 5303DC 6303DC 6803DC 7503DC 取扱説明書 CONTENTS Important Instructions......................................................................... 2 Getting Started.................................................................................... 6 Features.................................
IMPORTANT INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This owner's guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. Please refer to our website for the most current version of our owner’s guide.
to come in contact with water or wet locations. - Do Not use this product near furnaces, fireplaces, stoves or other high-temperature heat sources. - Do Not place the power supply (model 6803DC only) or power cord near heat sources, such as heaters or radiators. - Do Not position this product too close to draperies or other loose fabrics as they may be drawn into the product, cutting off airflow and damaging the motor.
IMPORTANT INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS - To reduce the risk of fire or electric shock and injury to persons, do not use in a window. - The plug portion of the adapter is used as a disconnect device. Therefore, the appliance should be placed near the socket outlet and easily accessible.
latches and is flush with the face of the plug. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be removed. Discard product if the attachment plug is damaged. A. B. C. D. FCC WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
GETTING STARTED Installing Circulator Head (Model 6803DC Only) No tools required! Stand Assembly (Model 6803DC Only) 1. Gently place the circulator head face down on the ground on a soft cloth to avoid scratches or damages to the unit. Insert power cord into the top of pole (A) and pull through the bottom (B). Align the Lock Release Button (C) on circulator head with the hole (D) located on the pole. Push the pole onto the circulator head until the Lock Release Button snaps into place. B D 1.
Cord Management Adjusting Height (Model 6803DC Only) 1. Wrap cord around Air Accelerator, located on back of unit. Secure cord with three clips (G) located at 2, 6 and 10 o'clock positions. 1. Before adjusting the height of the circulator, support the circulator head with one hand. Use your other hand to loosen the height adjustment collar by gently rotating it counter-clockwise. G 2.
FEATURES DIRECTABLE AIRFLOW Direct the airflow where you want it. CORD MANAGEMENT Integrated cord wrap. FINGER FRIENDLY DESIGN Resists curious fingers. ENERGY-SAVING TIMER 1–12 hour timer. TOUCH-SENSITIVE CONTROLS (99 SPEEDS) A speed setting for every comfort level. REMOTE CONTROL Convenience at your fingertips. 8 English SILICON FEET Non-marking feet added for stability.
CONTROLS Model 5303DC, 6303DC, 7503DC Only TIMER BUTTON POWER ON/OFF SPEED/TIMER INDICATOR DISPLAY SPEED/TIMER ADJUSTMENT BUTTONS -/+ English 9
CONTROLS Model 6803DC Only SPEED/TIMER ADJUSTMENT BUTTONS -/+ SPEED/TIMER INDICATOR DISPLAY POWER ON/OFF TIMER BUTTON 1. Insert DC power cord plug into port that extends from the bottom of circulator. 2. Connect the AC power cord to the power supply. 3. Plug the power cord into a power outlet. 10 English POWER SUPPLY (24V DC/2.
HOW TO USE 1. Touch to power on. Your circulator returns to last saved memory setting. 2. Select desired speed by pressing -/+. Press and hold -/+ to adjust speed up or down in 5 speed increments. Speed is indicated by number shown on Speed/ Timer Indicator Display. 4. To adjust timer, repeat Step Three. 5. To cancel timer, repeat Step Three and set timer for 0. CORD MANAGEMENT 1. Wrap cord around Air Accelerator, located on back of unit.
REMOTE CONTROL Screwdriver required. Your circulator remote includes (1) coin style 3V CR2032 battery. Battery comes pre-installed. Remove battery pull tab before first use. 1. For battery replacement, the remote requires one coin style 3V CR2032 battery. Always use the correct size and grade of battery for this product. 2. To replace battery, open battery door on the back side of the remote control (you will need to loosen the small screw on door using a #1 Phillips screwdriver).
GRILL & BLADE REMOVAL WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing blade. REMOVABLE GRILL 1. Using a phillips head screwdriver, remove grill by unscrewing the 4 screws located along the perimeter of the inlet grill at roughly 2, 5, 7, and 10 o’clock positions. This will release the grill. To reattach, position grill so the logo in the center of the grill is straight. Align the Locator Pin to reconnect grill. Once aligned replace screws.
CLEANING Because your product moves a substantial amount of air, it will need regular cleaning to remove lint, dust and grime. Never clean the product in any manner other than instructed in this owner's guide. WARNING Observe the following safety information to avoid risks and property damage. Do unplug your product before cleaning. Do Not use gasoline, thinners, solvents, ammonias or other chemicals for cleaning. Do Not attempt to repair or replace parts.
TROUBLESHOOTING PROBLEM The unit fails to power on. POSSIBLE CAUSE AND SOLUTION Unit is not plugged in. Plug Power Cord into electrical outlet. Model 6803DC Only - Ensure the AC power cord is plugged into the power supply and ensure DC power cord is plugged into the circulator. Ensure unit fan speed setting is selected. Plug fuse has blown (USA Models 5303DC, 6303DC, 7503DC Only). Replace fuse. See USER SERVICING INSTRUCTIONS on page 5. Unit is damaged or in need of repair. Cease usage and unplug.
