Use and Care Manual

10 English
How to Clean
 Your heater has no user serviceable parts. Do not disassemble the
unit. This will void your warranty. If service is required, return your
heater to Vornado (see WARRANTY for instructions).
 The motor is permanently lubricated and requires no oiling.
Because your heater moves a substantial amount of air, it will need
regular cleaning. To clean follow these simple instructions:
1. Unplug the unit.
Note: Do not use gasoline, thinners, solvents or other chemicals for
cleaning.
2. Remove U-shaped Inlet Grill by sliding it up until it comes off the
heater. Wipe with a soft cloth and/or run it under running water. Dry
thoroughly before replacing.
3. Use brush attachment on household vacuum cleaner to softly
vacuum permanent Screen Filter on heater.
Note: It is recommended to clean Steel Filter 1x per month.
4. Use the brush attachment on your household vacuum cleaner to
vacuum any accumulated dust off the Front Outlet Grill. Wipe
down the entire surface with a soft cloth.
Note: Vacuuming the outside of the heater is recommended on
a weekly basis. You should periodically blow out the heater with
pressurized air to keep heat element and motor clear of dust, hair and
debris that can build up inside the heater as it moves air during use.
This also eliminates unwanted odors caused by accumulation of these
particles inside the unit.
Note: Do not modify with any aftermarket accessory.
Cleaning and Storage
Built-In Cord Storage
Safely store excess cord on the back of heater.
Cool Touch Case
Safe to touch, even on high heat setting.
Automatic Safety Shut-Off System
If airflow becomes blocked, power to the heater is shut
off to prevent overheating.
Automatic Tip-Over Protection
If heater tips over, safety shut-off system cuts power
to heater. Position heater back in upright position.
Touch Power button and heater will return to last stored
setting.
Advanced Safety Features
Storage
During the off-season or after extended periods of non-use, you may
choose to store your heater. To ensure long life of the product, it is
recommended to store your heater by following these instructions:
1. Unplug power cord and wrap around Cord Wrap on back of heater.
2. Thoroughly clean your heater.
3. Cover, or place back in retail carton if available. This will prevent
the unit from accumulating dust over time.
4. Store unit in a cool and dry location.