Specifications
10 English
5. Place Water Tank in sink with opening at the top and fill Water Tank
with cool tap water.
6. Ensure Gasket, the rubber ring around the Cap, is properly
positioned and replace Cap. Some downward pressure may be
needed to compress the Gasket prior to rotating the Cap 1/4 turn
clockwise.
7. Lower Water Tank into Base, positioning Fill Port (C) over raised
bump in Base (D). Once in nested position, the water outlet valve
inside Cap will open, releasing water into Base.
Installing Water Tank
This Humidifier has a 1.5 gallon capacity and 2.6 gallon output in 24
hours (if set to High Fan Speed, Continuous Humidity setting).
1. Unplug Humidifier. Place on firm and level surface, such as the
floor.
Note: Spills can occur during cleaning, moving, or refilling Water
Tank, so be careful to avoid spills when doing these activities.
2. Remove the Water Tank by grasping the recessed handle and
pulling towards you (A).
3. Turn Water Tank upside down and Remove Cap (B).
4. Empty any remaining water inside Water Tank. Rinse, wipe clean
and dry with clean cloth or paper towel.
How To Use
A B
²
²
C
D
F
8
E
D
C
B
A
G
H
J
K
L
M
7
6
5
4
3
2
1
9
10
11
12
13
14
15
16
9
1
2
3
4
5
6
7
8
10
11
12
K
G
A
B
C
D
E
F
H
J
ASM0001_ASM
WEIGHT:
A1
SHEET 1 OF 1
SCALE:1:2
DWG NO.
TITLE:
REVISION
DO NOT SCALE DRAWING
MATERIAL:
DATE
SIGNATURE
NAME
DEBUR AND
BREAK SHARP
EDGES
FINISH:
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
SURFACE FINISH:
TOLERANCES:
LINEAR:
ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN