Specifications

12 English
8 oz.
White Vinegar
+
1 gal.
Water
1 tsp.
Chlorine Bleach
+
1 gal.
Water
To Clean Base
1. Mix a solution of one (1) 8 oz. cup of undiluted white vinegar
and 1 gallon of water. Fill the Base with the solution; discard any
remaining solution. Let solution stay for 20 minutes.
2. Empty after 20 minutes and clean all interior surfaces with soft
brush. Dampen a soft cloth with undiluted white vinegar and wipe
out Base to remove scale.
3. Rinse thoroughly with clean warm water to remove scale and
cleaning solution before disinfecting the Base.
Disinfecting The Base
1. Mix a solution of 1 teaspoon chlorine bleach and 1 gallon of water.
Fill the Base with the solution, discard any remaining solution. Let
solution stay 20 minutes. Wet all surfaces.
2. Empty Base after 20 minutes. Rinse with water until bleach smell is
gone. Dry with clean cloth or paper towel.
3. We recommend replacing the Filter after use, but to prolong
the life of the Filter, disinfect by washing it in a solution of
one teaspoon of chlorine bleach in one gallon of water. Rinse
thoroughly to get rid of the bleach odor.
4. Reinstall all components. Components must be securely in place
for unit to function properly.
End Of Season Maintenance
1. Follow instructions at end of humidification season or when
Humidifier will not be used for at least one week or more.
2. Let Humidifier dry completely before storing. Do not store with
water inside Water Tank or Base.
3. Remove and discard the Filters if it is not suitable for reuse. Do
not store the Humidifier with wet Filters. If Filters are suitable for
future use, remove and empty water from the Base and Water Tank.
Replace the Water Tank, power unit On and select the HIGH Fan
Speed. Allow the unit to run until the Filters are completely dry.
3. Store in cool, dry location.
Cleaning and Maintenance