Specifications

8 English
Controls
Power Button - turns the unit On or Off. LED indicator lights
will illuminate default settings when powered On. Unit will
default to High Fan Speed, Continuous Humidity.
Fan Setting Button - select desired Fan Setting. On the EVAP3
select - Low, High or Auto. On the EVAP1 select - Low (I), Medium
(II) or High (III).
Low or (I) - operation for quiet, nighttime use or smaller rooms.
On Low operation, your Humidifier may run without refilling for
extended periods.
Medium or (II), EVAP1 Only - operation for normal use.
High or (III) - operation for fast humidification for larger rooms.
High speed operation will evaporate 2.6 gallons of water (+/-
10%) in 24 hours of continuous operation. (This assumes room
conditions of 70º F and 30% relative humidity.)
EVAP3 Pictured
B C
A
Auto, EVAP3 Only - operation for more precise humidity control.
Fan speed will fluctuate between High, Low and Off to better
maintain set humidity level with the minimal amount of Fan noise.
Humidity Button - sets desired humidity level. Press Humidity
Button until desired humidification level is illuminated, 35% - 60%
or Continuous. The unit will operate until the desired humidity
level is reached, at this point, the Fan will turn Off and the Fan
speed indicator light will turn Off. The Humidity level indicator
light will remain On. If the Fan does not turn on, the set Humidity
level may be lower than the room humidity level. Increase the
Humidity set point until the Fan turns On. This is an indication
of the level of humidity already in the room. If moisture forms on
walls or windows, lower humidity settings or turn Off Humidifier.
C A
B