User Manual

ManualsBrandsVornado ManualsHeating, Cooling & Air QualityVornado OSCR37 Oscillating Tower Fan and Air Circulator with Remote, Smooth Oscillation, Timer and Touch Controls, 37-Inch

English

1. Touch to power on.

2. Select desired speed by

pressing

. Speed is indicated

by number of lights illuminated:

3. Press

to activate timer. The

and Indicator Lights will

turn orange to indicate timer

adjustment mode. While in this

mode, select amount of time in

three-hour intervals by pressing

. After a few seconds, the

ashing orange Indicator

Lights will turn white,

indicating you have left timer

adjustment mode.

The

will continue to glow

orange to indicate the timer is

set.

4. To adjust timer setting,

press

5. To cancel timer, cycle through

the timer settings until off. You

can also press and hold

for

4 seconds. The indicator lights

will ash, indicating the timer is

off. When timer is off, the will

no longer glow orange.

NOTE: Your tower fan is

equipped with a photodetector

sensor. The brightness of the

control display will automatically

adjust based upon the amount

of light

detected in the room.

HOW TO USE

OSCILLATION

TIMER

POWER ON/OFF

FAN SPEED

Before use, check appliance for visible damage. DO NOT USE THIS TOWER if there is evidence of damage. If any damage is found, contact

Vornado Air LLC at 1-800-234-0604.

SPEED/TIMER

INDICATOR

LIGHTS

FAN SPEED

TIMER

Speed: TURBO

Timer: 12 HOURS

Speed: HIGH

Timer: 9 HOURS

Speed: MEDIUM

Timer: 6 HOURS

Speed: LOW

Timer: 3 HOURS

OSCILLATION

POWER