model OSCR37 TOWER CIRCULATOR OWNER’S GUIDE READ AND SAVE THESE INSTRUCTIONS vornado.
We expect this product to be perfect. If it is not, we will make it right. vornado.com 800-234-0604 help@vornado.
CONTENTS Important Safety Instructions.............................................................. 4 Troubleshooting ................................................................................ 13 Features............................................................................................... 8 Warranty............................................................................................. 14 Getting Started...............................................................................
READ AND SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See www.vornado.
SAFE USE WARNING—To reduce risk of fire, electrical shock and injury to persons, observe the following: - WARNING: To reduce likelihood of circuit overload, fire and electric shock, do not operate with a solid state speed device, such as a dimmer control switch. - Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair. - Do not operate unit if the unit has been dropped or damaged.
screwdriver to slide open the fuse cover (located on the plug) (See Fig. A). 5. Remove fuse by using the screwdriver to gently lift each end of the fuse (See Fig. B). 6. Install the replacement fuse by using the screwdriver to gently push each metal end of the fuse into the receptacle one at a time. Do not push on the center of the fuse—it is fragile and may break. 7. Slide the fuse cover closed using the screwdriver. When closed, the cover should fit completely in the plug.
BATTERY DISPOSAL: Please dispose of batteries according to the local laws and regulations of your region, and while keeping them away from children. Some batteries may be recycled and accepted for disposal at your local recycling center. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK. New and used batteries may cause injury. Keep new and used cells (or batteries) away from children.
FEATURES TOUCH-SENSITIVE CONTROLS with auto-dimming digital display ENERGY-SAVING TIMER 3, 6, 9, 12 hour timer. FINGER-FRIENDLY DESIGN Resists curious fingers. MULTIPLE SPEEDS 4 speed settings for every comfort level. CARRY HANDLE STURDY BASE For wobble free airflow. SILICON FEET Non-marking feet added for stability. 8 English REMOTE CONTROL Convenience at your finger tips.
GETTING STARTED BASE ASSEMBLY Screwdriver required. 1. Assemble the two base halves together, pressing the two halves together until flush. You should hear a slight click when fully connected. 3. Attach base to tower using 8 screws provided. x8 2. Assemble the base to the bottom of the tower. There is an alignment pin (A) located on the bottom of the tower and an alignment recess (B) located on the base. An arrow on bottom of base indicates alignment recess location.
HOW TO USE Before use, check appliance for visible damage. DO NOT USE THIS TOWER if there is evidence of damage. If any damage is found, contact Vornado Air LLC at 1-800-234-0604. 1. Touch to power on. 2. Select desired speed by pressing . Speed is indicated by number of lights illuminated: Speed: TURBO Timer: 12 HOURS Speed: HIGH Timer: 9 HOURS Speed: LOW Timer: 3 HOURS Speed: MEDIUM Timer: 6 HOURS 3. Press to activate timer.
REMOTE CONTROL REMOTE FUNCTIONS BATTERY REPLACEMENT 1. Press to power on. 2. Select desired speed setting by pressing -/+ button. 3. Press 1. For battery replacement, the remote requires one coin style 3V CR2032 battery. Always use the correct size and grade of battery for this product. to activate timer. 4. To adjust timer setting, press . 5. To cancel timer, cycle through the timer settings until off. 6. Press ( ) to turn Oscillation on and off.
CLEANING Because your tower moves a substantial amount of air, it will need regular cleaning. If service is required, return your tower to Vornado (see WARRANTY for instructions). WARNING: To reduce the risk of electrical shock and injury to persons, unplug the tower before cleaning. REGULAR CLEANING 1. Unplug tower before cleaning. 2. Use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust off the tower. 3. Wipe down the entire tower with a soft cloth.
TROUBLESHOOTING PROBLEM Unit fails to power on. POSSIBLE CAUSE AND SOLUTION Unit is not plugged in. Plug Power Cord into electrical outlet. Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance. Fuse needs to be replaced. See IMPORTANT INSTRUCTIONS for how to replace the fuse or contact Consumer Service. Unit is not producing sufficient amount of air. Ensure unit is set to highest setting for maximum air circulation.
We’re Here To Help WARRANTY We expect this product to be perfect. If you’re not satisfied with this product, let us know. Vornado Air LLC (“Vornado”) warrants to the original consumer or purchaser this Vornado® Whole Room Circulator (“Product”) is free from defects in material or workmanship for a period of five (5) years from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.
Vornado Air, LLC 415 East 13th Street, Andover, Kansas 67002 800.234.0604 | vornado.