Use and Care Manual

English

1. Touch to power unit ON or OFF.

2. Select desired speed setting by pressing or . There are four

(4) speeds: 1- LOW, 2- MEDIUM, 3- HIGH & 4- TURBO. Speed is

indicated by number show on display.

3. Touch to change from direct airow to exhaust. Touch the

button again to change from exhaust to direct airow.

DIRECT MODE

EXHAUST MODE

Note: When the unit is powered off, it will automatically move to

the CLOSED position (meaning it will not be in direct or exhaust

airow modes). When rst plugged in and turned on, the unit will

move to DIRECT MODE. After that, the unit will remember user

settings when powered ON/OFF.

4. The product includes an integrated thermostat and the indoor

room temperature will be illuminated on the display only when the

thermostat is activated (in AUTO MODE). Touch to activate AUTO

MODE.

• Touch or button to set your ideal temperature, holding

either button for 3 seconds will allow for quick temperature

adjustment up or down by 5 degrees per second.

• While in this adjustment mode, the temperature display will

momentarily ash and then return to display the current indoor

room temperature.

• Touch the to deactivate AUTO MODE. The icon will turn white

to indicate AUTO MODE is deactivated.

Note: Temperature display is Fahrenheit only.

Note: Your TRANSOM is equipped with auto-dimming controls. All

non-essential lights will turn off after a few seconds of inactivity. Only

the power button will remain illuminated. The rst touch to the control

panel or remote will wake up the unit, allow for setting adjustment and

will go dark again after a few seconds of inactivity.

HOW TO USE