User Manual

12 English
HOW TO USE
CONTROLS
1. Touch
to power on. All control panel LED’s
will illuminate white to indicate the unit is
powered on. When the humidier is powered off,
only
will illuminate white.
Note: After rst use, current settings are saved
when powering off or unplugging (excluding
timer function).
2. Set humidity level by touching
/+. The
humidity settings will increase in increments of
5%. Once set humidity is reached, Element will
turn off until the humidity level drops below the
selected setting.
The humidier will evaporate 4 gallons of
water (+/- 10%) in 24 hours of continuous
operation. (This assumes room conditions of
70º F and 30% relative humidity.)