Manual

9
English
HOW TO USE
Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact
Vornado Air LLC at 1-800-234-0604.
1. Use integrated handle on back of heater
for lifting and carrying.
2. Position heater so airflow is
not obstructed.
3. Plug power cord into standard grounded
wall outlet.
4. Press the power button (I/O). Power button is
illuminated when powered On.
5. Select a Mode
.Select Low Heat (I) or High
Heat (II) setting.
6. Set thermostat to desired temperature using
thermostat knob. When the room reaches the
desired comfort level, turn the thermostat knob
slowly counterclockwise until the heat cycles off.