Owner Manual

9
English
Note: The motor is
permanently lubricated
and requires no oiling.
CLEANING
BLADE REMOVAL
1. Pull the blade straight out from the shaft.
2. Wipe the Blade with a damp cloth. If your circulator
is used in a greasy environment, such as a kitchen,
mild soap or a common household cleaner may be
necessary. Do not use solvents. Do not place blade in the
dishwasher. The excessive heat can distort the plastic.
3. To reattach - be certain the at side of the shaft aligns
directly with the corresponding at side on the blade’s
socket. Push the blade all the way on the shaft until it
bottoms out. Do not use a hammer as this could result
in bearing damage.
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing blade.