Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured
4
G. Use an 8mm socket or flat-tip screwdriver to
loosen the hose clamp securing the intake
air tube to the throttle body and pull the tube
away from the throttle body. Remove the
two 10mm nuts securing the air box as
shown in Fig. 1D. Pull the air box straight up
to release it from the retaining grommet on
the bottom and remove the entire assembly
(as shown in Fig. 1E) from the vehicle.
H. Use a 7mm socket to remove the MAF sen-
sor element from the air box assembly as
shown in Fig. 1F. Set aside for reinstallation
in a later step.
Fig 1D
10MM NUTS
Fig 1E
Fig 1F