Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12

D. Remove the retaining clips securing each

injector to the fuel rail and carefully pull each

injector out of the rail. Set the OEM injectors

aside as they will not be reused.

E. Lightly lubricate the O-rings at each end of

the supplied fuel injectors with clean motor

oil.

F. Install the new fuel injectors into the fuel rails

with the electrical connectors facing outward.

Secure with the OEM retaining clips. See

Fig. 3C.

G. Carefully lower the fuel rail/injector assembly

down onto the intake manifold, ensuring that

each injector seats properly into its bore.

H. Reinstall all of the fuel rail and fuel line fas-

teners and the black plastic engine cover

support.

I. Reconnect the fuel line and reinstall the safe-

ty clip.

J. Reconnect each fuel injector electrical con-

nector.

K. Reinstall the fuel tank cap.

Fig 3C

NOTE: The OEM and new replacement fuel injectors are

very similar in appearance. Take care not to mix

them up.