Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured
20
1. Disconnect the charging wire and plug locat-
ed on the back side of the alternator.
Remove alternator and alternator bracket
(the factory mounting stud must be removed
to allow removal of alternator).
See Fig 4A, 4B.
2. Remove oil galley plug located next to the
timing chain cover on the front driver side of
the engine block. Set aside plug, as it will not
be reused. See Fig 4C.
4. OIL FEED INSTALLATION
(ENGINE OIL-FED UNITS ONLY)
Fig 4A
Fig 4B
Fig 4C