Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured
24
D. Locate the P/S support plate, three (3)
2.981” long spacers, one (1) M10 x 120mm
screw, one 3/8-16 x 4.0” screw, and one (1)
3/8-16 x 4.5” screw and their associated
washers. See Fig. 6C.
E. Position the P/S plate and screws as shown
and secure plate by tightening only M10 x
120mm and 3/8-16 x 4.0” screws. Leave the
remaining 3/8-16 x 4.5” screw loosely
installed.
F. 2013 models only: Install the supplied 6-rib
idler pulley and .85" idler spacer into position
as shown. Secure the idler using the sup-
plied bearing pilot, 3/8-16 x 2.75" screw,
washers and nylock nut. See Fig. 6D, 6E.
G. 2010-2012 models only: Install the P/S
pump using the OEM fasteners. See Fig. 6F.
Fig 6C
(2013 models only) Fig 6D
3/8 X 4.0L
M10 X 120MM
3/8 X 4.5L
P/S SUPPORT
PLATE
(2013 models only) Fig 6E
Fig 6F