Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC.
All Rights Reserved, Intl. Copr. Secured
25
H. Locate the S/C mounting plate and one .085"
long spacer, six 3.566" long spacers, five
3/8-16 x 4.5” screws, one 3/8-16 x 3” screw,
one 3/8-16 x 6.25" screw, and their associat-
ed washers. Position the hardware and spac-
ers in the plate as shown. See Fig 6G.
I. Remove loosely installed 3/8-16 x 4.5” screw
from prior installation of P/S bracket.
J. Lower the supercharger plate into position,
making sure to start each screw into the
appropriate hole with the 3.566” spacers.
See Figures 6J & 6K.
Fig 6G
3/8-16 X 4.5"
3/8-16X4.5 BOLT
WITH .085" SPACER
3/8-16X3" BOLT
LOOSELY INSTALLED
3/8-16X6.25
LOOSELY INSTALLED