Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured
26
Fig 6H
3/8-16X4.5 BOLT
WITH .085" SPACER
K. Make sure to sandwich the two (2) .085”
spacers between the steel bracket and the
aluminum P/S bracket at either end of the
C-shaped section of the steel bracket that fits
around the P/S pulley. See Figures 6H & 6I.
L. Tighten the six 3/8-16 x 4.5” screws, leaving
the remaining hardware loose for the next
step.
Fig 6J
Fig 6K
Fig 6I
.085" SPACERS
5 x 3.566"
SPACERS