Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC.
All Rights Reserved, Intl. Copr. Secured
27
Fig 6L
3/8-16 X 1.25
M. Use three (3) 3/8-16 x 1.25” screws with
washers to mount the supercharger to the
S/C plate using the three holes closest to the
center of the arc (see Fig. 6L), and tighten
these screws.
N. Reinstall the OEM 6-rib accessory drive belt
following the original belt routing. There is a
diagram in the owner’s manual for reference
(see also Fig. 6M).
(2013 model shown) Fig 6M