Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured
28
O. Locate the front tensioner support plate with
the following (see Figures 6N, 6O, 6P):
i. Nine (9) 1.434” spacers
ii. Two (2) 3/8-16 x 2.75” screws with wash-
ers
iii. One (1) M12-1.75 x 20mm screw (no
washer)
iv. Three (3) M10-1.5 x 55mm screws with
washers
v. One (1) M10-1.5 x 120mm screw with
washer (from the drive assembly)
vi. One (1) M10-1.5 x 110mm screw with
washer (from the drive assembly)
Fig 6N
6 X 3.566"
SPACERS
3 X 2.981"
SPACERS
9 X 1.434"
SPACERS