Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC.
All Rights Reserved, Intl. Copr. Secured
29
P. Remove the one (1) 3/8-16 x 3” and one (1)
3/8-16 x 6.25” screw previously loosely
installed. Take care not to lose the .085”
spacer sandwiched between the steel plate
and the aluminum P/S bracket in the location
of the 3” screw. Install the front tensioner
support plate using all of the hardware and
spacers in the previous step. Reinstall the
one (1) 3/8-16 x 3” and one (1) 3/8-16 x 6.25”
screw, again taking care not to lose the .085”
spacer.