Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured
34
E. Locate the end of the radiator hose marked
UPR RAD. Use a hose cutter to cut the hose
just before the bend, approximately as shown
in figures 7C and 7D, leaving the hose as
long as possible.
F. Transfer the OEM radiator hose clamp from
the newly-cut fragment back to the main hose
opposite the cut.
Fig 7C
Fig 7D