Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured
36
A. Locate the Discharge Assembly (4GE112-030
/ -038) See Fig 8A
B. Locate the four 5/16-18 X .5" screws and
washers, welded CAC (Charge Air Cooler)
assembly, and the supplied mounting brack-
ets.
C. Apply some RTV sealant onto the threads of
each bolt. Attach the brackets on to the CAC
end tanks as shown. Leave the screws loose
to allow for final adjustment at a later step.
D. Set the CAC with brackets in place in front of
the radiator. See Fig 8B.
8. CHARGE AIR COOLER
INSTALLATION
Fig 8A
Fig 8B