Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12

S. Make sure the honeycomb airflow straighten-

er is installed as close to the 3” end of the

progressive coupler as possible and secured

with a single #56 hose clamp as shown in

Fig. 8V.

T. Locate the supplied MAF housing and install

the previously-removed MAF sensor using

the supplied M4 hardware. Install this MAF

assembly into the open end of the progres-

sive coupler so that the MAF sensor remains

horizontal and the electrical connector points

toward the front of the car. Be sure that the

flow direction arrow printed on the MAF sen-

sor points toward the throttle body. Secure

with a #64 hose clamp. See Figures 8W &

8X.

NOTE: The airflow straightener is a critical device to ensure

optimal fueling. Failure to install this device can

cause engine damage or failure and void any war-

ranties/

Fig 8V

NOTE: Failure to properly install this device can result in

engine damage or poor fuel economy.

Fig 8W

Fig 8X