Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured
48
J. Relocate the previously-removed ambient air
temperature sensor as follows:
i. Drill a 15/32” hole through the plastic
shroud on the passenger side of the
CAC as shown in Fig. 9E.
ii. Snap the temperature sensor into the
hole from the CAC side. Make sure it
clips securely into place.
iii. Reconnect the OEM electrical connector
to the sensor. See Fig. 9F.
Fig 9E
Fig 9F