Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured
52
F. MANUAL TRANSMISSION ONLY
i. Cut the long end of the 3/8” hose/check
valve assembly approximately 4.5” from
the check valve.
ii. Insert the supplied plastic 90º fitting into
the open end of the hose.
iii. Connect the remaining length of 3/8”
hose to the open port leading to the
crank case just below the front of the
intake manifold and secure with one of
the remaining hose clamps.
iv. Route the hose to the open end of the
plastic 90º fitting. Assemble the hose to
the fitting, trimming as appropriate. See
Fig. 11C.
Fig 11C
VALVE
INTAKE MANIFOLD