Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC.
All Rights Reserved, Intl. Copr. Secured
53
12. ENGINE COOLANT OVERFLOW
A. Locate the supplied engine coolant reservoir
and ensure that the ¼ NPT x 5/16 90º fitting
is installed and clocked as shown in Fig.
12A. Install the supplied cap with retaining
cord.
B. Install the supplied bracket onto the reservoir
using the supplied ¼-20 bolts and washers
as shown in Fig. 12A.
C. Remove the 15mm-headed OEM belt ten-
sioner bolt located toward the passenger
side as well as the 15mm nut on the passen-
ger side cylinder head stud where the ground
strap attaches. See Fig. 12B.
Fig 12A
Fig 12B