Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC
All Rights Reserved, Intl. Copr. Secured
58
H. Routing the 5/8” hose upward, place the res-
ervoir assembly back into position and
secure with the supplied #12 sheet metal
screws. See Fig. 13D.
I. Locate the supplied remote fill spout with
cap. Assemble it to the supplied mounting
bracket using the supplied ¼-20 bolts and
washers as shown in Fig. 13E.
J. Place the remote fill spout assembly in the
location shown on the driver side radiator
core support, ensuring there is adequate
clearance to the air filter. Mark the mounting
hole locations and drill with an 11/64” drill bit.
K. Mount the assembly as shown using the sup-
plied #12 sheet metal screws. See Fig. 13E.
Fig 13D
Fig 13E